FallTech Contractor 1 D-Ring Harness

FallTech Contractor 1 D-Ring Harness

The FallTech Contractor Non-Belted Single D-Ring Harness is equipped with 1 back D-ring. It has 9 position tongue buckle leg straps and a mating buckle chest. This harness features five points of adjustment and has a torso keeper for stowing an idle lanyard connector.

Features:

• 5 points of adjustment (chest, legs and torso)
• Paired mating buckle adjusters on front torso.
• Torso keeper for stowing idle lanyard connector

Specifications:

• Webbing: Polyester; Min. 5,000 lbs. tensile strength
• D-Ring: Alloy Steel; Min. 5,000 lbs. tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs. tensile strength
• Tensile Strength: Min. 5,000 lbs.
• Maximum Capacity: 425 lbs * To maintain ANSI Z359 compliance, limit total user weight to 310 lbs
• ANSI Capacity: 130 to 310 lbs. Max
• OSHA Capacity: 130 to 425 lbs.
• OSHA Standards: CFR1926.502 and CFR1910.66
• ANSI Standards: Z359.11-2014

Available Sizes:

• Universal: (7016)
• XL/2X: (7016X/2X)
• 3X: (70163X)