FallTech Contractor Belted 3 D-Ring Harness

The FallTech Contractor Belted 3 D-Ring Harness is equipped with 1 back and 2 side D-rings. It has 9 position tongue buckle leg straps and a mating buckle chest. This harness features five points of adjustment and has a torso keeper for stowing an idle lanyard connector. There is a durable 4 inch waist and and 7 inch shoulder pads.

Features:

• Three D-rings for fall arrest and positioning
• 5 points of adjustment (chest, legs and torso)
• Paired mating buckle adjusters on front torso.
• Torso keeper for stowing idle lanyard connector
• 9-position tongue buckle leg straps
• 7.5 inch StayPut shoulder pads
• 4 inch waist pad/positioning assembly
• Removable workbelt

Specifications:

• Webbing: Polyester; Min. 5,000 lbs. tensile strength
• D-Ring: Alloy Steel; Min. 5,000 lbs. tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs. tensile strength
• Tensile Strength: Min. 5,000 lbs.
• Maximum Capacity: 425 lbs * To maintain ANSI Z359 compliance, limit total user weight to 310 lbs
• OSHA Standards: CFR1926.502 and CFR1910.66
• ANSI Standards: Z359.11-2014

Available Sizes:

• S/M (7073SM)
• L/XL (7073LX)
• 2X (70732X)
• 3X (70733X)