Featured Manufacturers
Model#: 63415
Stock#: ZIR-63415
UPC/GTIN/EIN: 042186603767
Get It By Nov 29
- Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 inch (19 mm) deep
- DeepScan mode doubles the scanning depth to 1 1/2 inches (38 mm)
- Metal mode detects non-ferrous metal, such as copper pipes, up to 1 1/2 inches (38 mm) deep, and ferrous metal, such as rebar, up to 3 inches (76 mm) deep
Zircon MultiScanner i320 Stud Sensor
The MultiScanner i320 OneStep quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. It also locates ferrous metal up to 3 in. (76 mm) deep. A 3-mode switch makes it easy to change functions, while the display screen, SpotLite Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.
Features:
- Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 inch (19 mm) deep
- DeepScan mode doubles the scanning depth to 1 1/2 inches (38 mm)
- Metal mode detects non-ferrous metal, such as copper pipes, up to 1 1/2 inches (38 mm) deep, and ferrous metal, such as rebar, up to 3 inches (76 mm) deep
- WireWarning detection indicates the presence of live, unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes
- ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud
Specifications:
- Dimensions:
- 7.28 in. H x 3.27 in. W x 1.43 in. D (185 mm x 83 mm x 36 mm)
- Weight 6.2 oz. (175 g) without battery
- Battery Type: 9 V alkaline (not included)
- Position Accuracy:
- Up to a depth of 3⁄4 in. (19 mm): Typically within 1⁄8 in. (3 mm)
- Up to a depth of 11⁄2 in. (38 mm): Typically within 3⁄16 in. (5 mm)
- In Metal Scan mode: Typically within 1⁄2 in. (13 mm) using the dual scan and mark procedure
- Depth:
- StudScan mode: Up to 3⁄4 in. (19 mm)
- DeepScan mode: Up to 11⁄2 in. (38 mm)
- Metal Scan mode: Up to 3 in. (76 mm) for rebar
- AC Position Accuracy:
- WireWarning Detection: Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
- AC Depth:
- In a typical wall with Romex wiring, the wire can be detected up to 2 in. (51 mm) deep
- Operating Temperature: 20° to 105°F (-7° to 41°C)
- Storage Temperature: -20° to 150°F (-29° to 66°C)
- Humidity 5-90% RH (non-condensing)
- Water Resistance: Splash and water resistant, not waterproof
ZIR-63415
Manufacturer: | Zircon |
Weight: | 0.65 |