Super Anchor Safety Retro-Flash System (Box of 80)

Super Anchor Safety Retro-Flash System

The Super Anchor Safety Retro-Flash System allows you to install anchors directly over your existing roofing material. Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No more tearing off your ridge cap to install fall arrest anchors with the Super Anchor Safety Retro-Flash System. It is a special metal flashing made from 20-gauge metal that slips under the course of roofing just above the anchor. It is held in place by the roofing material and the caulking used during installation. This product can be painted to match the color of the roofing material, too.

Features:

• Top-Chord Installation: Simply center the anchor over the truss and nail or screw the anchor down securely
• Backer-Board Installation. Install our ¾” backer board under the current roof sheeting and you do not need install into a truss – just install the anchor with the screws and you have a fall arrest anchor point
• Install the Retro-Flashing over your new anchor and install under the headlap of the existing roofing material