Milwaukee M12 HAMMERVAC Universal Dust Extractor

Features:

• OSHA Table 1 Compliance with AUTOPULSE filter cleaning mechanism
• Universal Design: works on any SDS Plus rotary hammer
• Allows users to drill up to 8" in depth and up to 1-1/4" in diameter
• Universal Side Handle
• Vacuum Port in dust box to allow the user to remove dust without exposure

Specifications:

• Adjustable Depth Gauge
• Auto On Mode
• Self-powered by Milwaukee M12 REDLITHIUM Batteries
• Small and Large Diameter Nozzles Included
• Replaceable HEPA Filter Included

The M12 HAMMERVAC Universal Dust Extractor is a universal solution for eliminating dust when drilling with any SDS Plus rotary hammer. It is the industry's only onboard universal dust extractor. The universal side handle allows it to operate with any SDS Plus hammer in the industry: corded, cordless, Milwaukee Brand, or other. The AUTOPULSE filter cleaning mechanism will clean the filter automatically after use, allowing for OSHA Table One Compliance. This extractor allows users to drill up to 8" in depth and up to 1-1/4" in diameter with two accessory nozzles designed for small and large diameters. The adjustable depth stop allows users to quickly and accurately set their desired hole depth. When full, the dust box can be emptied with no exposure to the user by hooking it up to a large dust extractor to vacuum out the dust. The tool has an Auto On/Off Mode that saves users' time and battery life. The M12 HAMMERVAC runs off of any of Milwaukee's M12 REDLITHIUM Batteries to be a fully self-powered unit.