Hougen Rotabroach Annular Cutters with Stack Geometry - 2 Inch Depth

Hougen Rotabroach Annular Cutters with Stack Geometry - 2 Inch Depth

The Hougen Rotabroach Annular Cutters with Stack Geometry - 2 Inch Depth includes stack geometry for cutting through two or more pieces of steel. Hougen Rotabroach Annular Cutters provide better chip evacuation, which requires less horsepower and offers better performance in deeper holes. Hougen has perfected this design so that there is less friction and a better hold finish. Hougen’s patented Edge geometry provides faster, smoother cuts with less chatter because each tooth has two or three angles to them. 

Features:

• Stack geometry for cutting through two or more pieces of steel
• Two flats for cutter mounting, O.D. Margins, I.D. Margins, fully fluted tools, patented tooth geometries, material types, coatings, and resharpenability.
• Patented Hougen-Edge Geometry A patented tooth geometry that provides long tool life, less chatter, and extended resharpenability.
• Compared to traditional tooling (twist drills, etc.) Rotabroach cutters can multiply your cutting speed by up to 3 times.
• You get longer tool life, a more accurate hole, a better finish, with no burrs.
• Maximize feed rates because up to 10 or more cutting edges distribute the cutting load evenly.
• By converting a smaller area to chips, Rotabroach Cutters require less horsepower and thrust.